contact information:+8619870423316 Top Navigation

Your current location: home page > Mineral processing knowledge > Mineral processing information

Picture of spiral chute wear

News list
Release time:2023-07-16 author:huang

If you are looking for related products or have any other questions, you can call your mobile hotline or add WhatsApp at any time, and we are at your service!

Provide free solutions and quotes,Phone/WhatsApp:+8619870423316Immediately consult

Picture 1 of Spiral Chute Wear: Introduction of Chute Beneficiation as a Slope Flow Beneficiation Step. The mortar is fed to some inclined grooves or slopes, and with the assistance of flowing water, the mineral particle group is not tightened and layered. The upper part of the light mineral material is quickly discharged to the outside of the groove, while the lower layer of heavy mineral material is retained in the inner groove or slowly flows out from the lower end. After being picked up, fine beneficiation and tailings can be obtained. The spiral concentrator is a mining and beneficiation machine, especially ideal for mining and beneficiation of mineral sand in bays, rivers, beaches, and streams. The product has the characteristics of reasonable structure, simple installation, less land occupation, simple operation, stable beneficiation, clear mineral separation, strong processing ability, high efficiency, ultra-high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion prevention, and strong adaptability to feed volume or density, Granularity, and grade fluctuations. 2、 The application technique is to set up the spiral concentrator, align it with the vertical line, use an iron frame or wood to fix it in a suitable position, and use a sand pump to deliver the ore sand to the two feeding ports on the top of the spiral. This involves supplementing water and adjusting the concentration of mineral slurry. The mineral slurry naturally rotates from high to low, and an inertial centrifugal force appears in the rotating slope flow rate, resulting in differences in density, specific gravity, particle size, and morphology of the sand ore, By obtaining the efficiency of gravity or centrifugal force through swirling flow, the sand and ore are separated, and the concentrate flows into the beneficiation hopper and is piped out. The tail sand enters the tailings hopper and is moved to the sand tank through a pipeline, and then discharged by a mortar pump, completing the entire beneficiation process. Picture 3: Features and Highlights of the Wear of the 螺旋溜槽磨损图片 Spiral Chute: 1. It is characterized by significant miniaturization and strong processing capacity. Nowadays, the principle of ore processing is to create benefits on a large scale. 2. Fine granulation: for the treatment of fine and micro particle grade minerals, especially the treatment of ore materials with a particle size of -0.047MM, the original machine can generally ensure the recovery of+0.047MM Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration and so on, the spiral concentrator has developed from simply applying gravity and water blocking force to the level of using centrifugal force, mechanical vibration force, magnetic force and so on. Through the composite force field, the enrichment of useful minerals and the separation of fine particles and these micro particles increase the recovery rate of ore materials. 4. The basic starting point is to save energy, reduce consumption and environmental protection. The floor area and space should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting process, simple structure, convenient for Computerized maintenance management system. Wear picture of spiral chute 螺旋溜槽磨损图片 IV. According to the Granularity of processed mineral aggregate, the chute can be divided into three types: (1) coarse spiral chute, the maximum particle size of feeding is more than 2-3mm, and the maximum can be 100-200mm. (2) Sand ore chute, processing 2-3 millimeter sized ore. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphoethylene, tungsten, tin ore, tantalum ore, tantalum niobium ore or other nonferrous metals, rare metals and nonferrous metal ore bodies with different density and specific gravity from fine and small materials with Granularity of 0.3-0.02mm. Spiral Chute Wear Image 螺旋溜槽磨损图片 Spiral Chute Wear Image

Free design solutionFree design solution

24-hour engineer dispatch24-hour engineer dispatch

customer service

In order to better serve you, we can leave your needs here, such as handling materials, production capacity, and finished product requirements. A professional product manager will reply to you!

Related information

Copyright: Jinqiang Mining Machinery

Copyright: Jinqiang Mining Machinery