contact information:+8619870423316 Top Navigation

Your current location: home page > Mineral processing knowledge > Mineral processing information

Making spiral chutes by pulling gold

News list
Release time:2023-07-16 author:huang

If you are looking for related products or have any other questions, you can call your mobile hotline or add WhatsApp at any time, and we are at your service!

Provide free solutions and quotes,Phone/WhatsApp:+8619870423316Immediately consult

Drawing gold to make spiral chutes 1. Description: Gravity separation is widely used in the beneficiation of metal and non-ferrous metals due to its low pollution and low cost. The fiberglass spiral chute is one of the gravity beneficiation machinery, with a structural feature of a cubic parabolic cross-section. It is used to handle finer particle sizes of -0.2mm, and does not require flushing water in the sorting process. The tail part of the chute is selected in sections to select fine, medium, and tailings. 2、 The average working principle of the slurry passes through the head of the spiral groove and is slowly fed to the rotating groove surface for sorting. The tail of the spiral groove is equipped with a valve type equipment to obtain the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each equipment, the product gathering hopper allows the selected multi-directional mineral flow to converge and lead out. The slope change of the horizontal plane and curve of the spiral concentrator is very suitable for the selection of fine particle materials. 扳金制作螺旋溜槽 Making spiral chutes by pulling gold. 3. The characteristics of spiral chutes, such as low power consumption, simple structure, small land occupation, simple operation, stable beneficiation, clear mineral separation, no moving parts, convenient Computerized maintenance management system, and large production per unit area, have attracted much attention among various gravity separation machines. The equipment has a wider and flatter groove surface, and the mortar presents a large laminar flow area, making it more suitable for processing medium to fine (-4mm) particle sized ores. Our country has made fiberglass spiral chutes with diameters of 400, 600, 900, and 1200 millimeters, Ф The processing capacity of 1200MM four head is about 4-6 t/h. The glass fiber reinforced plastic chute is composed of a feeding average device, a cross (tripod), a feeding groove, a rotating groove, a cutting groove, a gathering bucket, and a groove support. 5、 Use This product is suitable for separating iron, ferrotitanium, chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin placer, tantalum niobium ore, niobium and other non-ferrous metal ores, rare ore metals or non-metallic minerals with different specific gravity. Making a Spiral Chute with a Metal Plate @ @ 000 Making a Spiral Chute with a Metal Plate


Free design solutionFree design solution

24-hour engineer dispatch24-hour engineer dispatch

customer service

In order to better serve you, we can leave your needs here, such as handling materials, production capacity, and finished product requirements. A professional product manager will reply to you!

Related information

Copyright: Jinqiang Mining Machinery

Copyright: Jinqiang Mining Machinery