contact information:+8619870423316 Top Navigation

Your current location: home page > Mineral processing knowledge > Mineral processing information

Spiral chute effect

News list
Release time:2023-07-16 author:huang

If you are looking for related products or have any other questions, you can call your mobile hotline or add WhatsApp at any time, and we are at your service!

Provide free solutions and quotes,Phone/WhatsApp:+8619870423316Immediately consult

The spiral chute effect one introduces that the chute sorting of minerals belongs to the inclined flow sorting process. The slurry is fed to a inclined chute or inclined surface, and under the push of water flow, the ore particles are loose and layered. The light minerals in the upper layer are quickly discharged from the groove, while the heavy mineral materials in the lower layer stay inside the groove or slowly discharge from the lower part. After being connected separately, concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are machines for mining and beneficiation, especially ideal for sand mining in coastal areas, riverbanks, sandbanks, and river beds. The equipment has the characteristics of correct structure, simple installation, small land occupation, simple operation, stable beneficiation, clear beneficiation, strong processing ability, high efficiency, high concentration of beneficiation, high recycling rate, and reliable operation. It has the advantages of lightweight, moisture-proof, rust prevention, corrosion resistance, and strong adaptability to fluctuations in feed volume, concentration, particle size, and grade. 2、 The spiral chute shall be set up by means of method, the vertical line shall be calibrated, the iron frame or wood shall be used to stabilize at the appropriate position, the sand ore shall be transported to the two ore feeding ports on the spiral roof by the slurry pump, the water shall be added, the concentration of mineral slurry shall be adjusted, the slurry shall naturally rotate from high to low, and a single coherent centrifugal force shall be generated in the rotating slope flow speed, and the difference in density, specific gravity, Granularity and morphology of the sand ore shall be obtained, Through the gravity and centrifugal force of the swirling flow, the sand and ore are separated. The selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings flow into the tailings hopper and are transported to the sand pit through pipelines. Then, they are discharged by a mortar pump, completing the entire beneficiation process. Effect 3, Advantages and Characteristics of the 螺旋溜槽效果 Spiral Chute: 1. Stable, easy to control, with a large concentration range. 2. The production and processing of materials have a high yield, high enrichment ratio, and high recovery rate. 3. Small usage space, low water consumption, simple construction, and no need for power. 4. It is simple to install, easy to operate, with minimal investment and fast returns. Spiral chute effect 螺旋溜槽效果 4. Structural composition: The spiral concentrator consists of a feed equalizer, a cross (tripod), a feed chute, a rotating groove, a selection groove, a gathering bucket, and a groove pillar. 5、 This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphoethylene, tungsten, tin ore, tantalum ore, tantalum niobium ore or other nonferrous metals, rare metals and nonferrous metal ore bodies with different density and specific gravity from fine and small materials with Granularity of 0.3-0.02mm. Spiral chute effect 螺旋溜槽效果 Spiral chute effect

Free design solutionFree design solution

24-hour engineer dispatch24-hour engineer dispatch

customer service

In order to better serve you, we can leave your needs here, such as handling materials, production capacity, and finished product requirements. A professional product manager will reply to you!

Related information

Copyright: Jinqiang Mining Machinery

Copyright: Jinqiang Mining Machinery