Low price wholesale of spiral chutes

Low price wholesale of spiral chutes 1. Equipment description: A gravity beneficiation machine that utilizes the continuous centrifugal force generated by the slurry in the spiral rotary motion to achieve lightweight and significant mineral separation. 2、 Using a method to set up a spiral concentrator, align it with the vertical line, use an iron frame or wood to fix it in a suitable position, and use a sand pump to transport the ore to the two feeding ports on the spiral head. Add supplementary water, adjust the concentration of the ore slurry, and the ore slurry will naturally swirl from top to bottom. In the flow rate of the inclined plane of the rotation, an inertial centrifugal force will occur, which will cause differences in the gravity, particle size, and shape of the sand ore, Through the influence of the gravity or centrifugal force of the swirling flow, the sand ore is separated, and the selected ore flows into the concentrate hopper and is piped out. The tailings flow into the tailings hopper and are piped to the sand ore pool, and then discharged by a slurry pump, completing the entire beneficiation process. Spiral Chutes Wholesale at a Low Price 3. Characteristics 1. Stable sorting steps and easy control 2. Large allowable range of feed density 3. Very high enrichment ratio and high recovery probability 4. Small area occupied and low water consumption 5. Simple structure and no power 6. Strong processing capacity 7. Simple installation and operation 8. Small investment and quick results spiral chutes wholesale at a low price 4 The structure of the fiberglass spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a rotating chute, an equipment acquisition chute, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting the rotating blades is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made durable and wear-resistant layer. He also has the advantages of lightweight, sturdy, and long-lasting durability in consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is also easy to operate. The ore separator is freely placed on the cross (or tripod) on the support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the beginning of the rotating groove, and the selection is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the sorted new products are divided into three categories (or four types) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to be gathered and exported separately. The transverse plane of the spiral chute and the different slopes of the curves are very suitable for the selection of small particle mineral materials. 5、 Applicable field: FRP chutes are suitable for separating fine iron ore, ferrotitanium ore, chromite ore, pyrite ore, tin ore, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon ore, rare earth and other metal and non nonferrous metal minerals with complete density ratio difference. Low price wholesale of spiral chutes