The latest technology of spiral chutes

The latest technology of spiral chute is described as gravity beneficiation, which is widely used in metal and non-metallic ore beneficiation due to its low environmental pollution and low cost. The spiral concentrator is one of the gravity separation equipment, with a structural characteristic that the cross-section presents a cubic parabolic state, suitable for processing finer particle sizes of -0.2MM. In the sorting process, there is no need to add flushing water, and fine, medium, and tailings are selected in sections at the tail of the tank. 2、 Working principle: The fiberglass chute sorting machine is not limited to being placed on the cross (or tripod) of the support table. The uniform mortar is slowly fed onto the spiral groove surface through the feeding chute installed at the head end of the rotating groove for sorting. The tail end is equipped with a valve block type product cutting groove, which divides the selected equipment into three categories (or four categories) radially according to grade. Change the acquisition width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected multi head ore flow to converge and export differently. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine particle ore materials. The latest technology of the spiral chute is characterized by its stability, easy operation, and wide density range. 2. Large material processing output, high enrichment ratio, and high recycling probability. 3. Small footprint, low water consumption, simple construction, and no need for power. 4. Easy installation, easy operation, minimal investment, and fast returns. The latest technology of spiral chutes is IV. The structure of spiral chutes is composed of a feeding device, a cross (tripod), a feeding groove, a spiral groove, a receiving groove, a gathering bucket, and a groove support. 5、 Scope of Application Spiral chute is applicable to the separation of fine grained iron ore, ferrotitanium ore, chromite ore, pyrite, sand tin, tantalum niobium ore, placer gold ore, coal, monazite, Rutile, zircon ore, rare earth ore and other metal and non-metallic mineral materials with sufficient specific gravity difference. The Latest Technology of Spiral Chutes The Latest Technology of Spiral Chutes