What is the closed circuit connection diagram of a spiral chute

What is the closed circuit diagram of a spiral chute? 1. Overview: The chute sorting belongs to the inclined flow sorting process. The mortar is fed to some inclined grooves or slopes, and with the assistance of water flow, the mineral particles become loose and layered. The upper layer of light minerals are quickly discharged outside the groove, while the lower layer of heavy minerals are retained inside the groove or slowly discharged from the lower part. After each is collected, the selected ore and tailings can be obtained. The fiberglass spiral chute is a mining and beneficiation machine, making it ideal for mining and beneficiation of mineral sand on beaches, river beds, sand banks, and streams. The product has the characteristics of correct structure, simple installation, small footprint, simple operation, stable beneficiation, clear mineral separation, high processing yield, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong adaptability to fluctuations in feed volume, density, Granularity and grade. 2、 The method is to set up the fiberglass chute, align it with the vertical line, use an iron frame or wood to stabilize it in a suitable position, and use a sand pump to deliver the ore to the two feeding ports on the spiral top. Add water to adjust the concentration of the ore slurry, and the ore slurry will naturally rotate from top to bottom, generating a single inertial centrifugal force in the rotating slope flow rate, based on the differences in the specific gravity, particle size, and state of the sand ore, Through the action of gravity and centrifugal force generated by swirling flow, the sand and ore are separated. The concentrate flows into the beneficiation hopper and is piped out. The tailings are discharged into the tailings hopper and moved to the sand pit through a pipeline, and then discharged by a sand pump, completing the entire beneficiation process. What is the closed circuit connection diagram of the spiral chute? 3. Highlights: 1. Stable, easy to operate, and with a large density range. 2. High material production yield, ultra-high enrichment ratio, and high recovery rate. 3. Small usage space, low water consumption, simple structure, and no need for power. 4. Easy installation, easy operation, low investment, and fast profitability. What is the closed circuit connection diagram of the spiral chute ? 4. The structural composition of the fiberglass spiral chute is composed of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral groove, a receiving groove, a gathering bucket, and a groove pillar. 5、 The application range of fiberglass spiral chute is suitable for processing 0.6-0.03MM and this vein ore and mineral, but it is unfavorable for separation when the mud content is high. Nowadays, it is widely used for processing iron ore, tungsten, tin ore sand, niobium tantalum ore, coastal and riverside placer mines, and sand gold mines. What is the closed circuit diagram of a spiral chute