Structural diagram of spiral chute

Spiral chute structure diagram 1. Introduction: Fiberglass reinforced plastic spiral chute combines the characteristics of gravity beneficiation spiral chute, gravity beneficiation spiral chute, shaking table, and beneficiation centrifuge. After being organized by the Ministry of Metallurgical Industry for relevant scientific research, design, school, or beneficiation company operation and appraisal, it is recognized as having excellent mechanical performance, advanced sorting indicators, and has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. It has now been recognized in the field of non-ferrous metals Ferrous is very versatile. This machine is used to separate iron ore, ferrotitanium, ferrochrome, pyrite, zircon ore, Rutile, monazite, phosphate ore, tungsten ore sand, tin ore, tantalum niobium ore, niobium ore and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with density and specific gravity difference from fine and small materials with Granularity of 0.3-0.02 mm. 2、 The production principle is that the slurry is evenly distributed and slowly fed onto the surface of the spiral groove through the feeding chute installed on the rotating groove head, implementing sorting. The bottom of the rotating groove is equipped with a valve block type product selection groove, which divides the selection equipment into three types according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper allows for the differentiation and aggregation of the obtained variable mineral flow. The cross-section of the spiral chute and the slope change of the curve are very suitable for the selection of fine particle materials. Spiral chute structure diagram 3. Features This machine is suitable for sorting iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten sand, sand tin, tantalum niobium, tantalum niobium and other non-ferrous metal ore bodies with different density and specific gravity of small materials with Granularity of 0.3-0.02mm. This machine has advantages such as stable sorting process, easy control, wide range of ore concentration tolerance, high enrichment, high recovery probability, small land occupation, low water consumption, simple structure, no need for power, large production capacity, simple installation, simple operation, small investment, and quick effectiveness. Structural Drawing of Spiral Chute IV. Chutes can be divided into three categories according to the Granularity of processed ore materials: (1) Coarse grained chutes, with the maximum feeding particle size of more than 2-3mm and up to 100-200mm. (2) The ore chute handles 2-3mm sized ore. (3) Slime chute, feeding Granularity is less than 0.074MM. 5、 Application field: Spiral chutes are used for processing 0.6-0.03mm or vein ores and minerals, but high mud content is unfavorable for sorting. It has now been widely used for processing iron, tungsten, sand tin, tantalum niobium mines, beach or river sand mines, and sand gold, among others. Spiral Chute Structure Diagram Spiral Chute Structure Diagram