Can gold be selected using spiral chutes

Can gold be selected using a spiral chute? 1. Explain that the chute selection belongs to the inclined surface flow selection process. Mortar is given to a partially inclined inclined chute or inclined surface. Under the push of water, the mineral particle group is loose and layered, and the upper layer of light minerals quickly flows out of the groove. The lower layer of heavy minerals are retained inside the groove or discharged slowly from the lower part. After receiving each, selected ore and tailings can be obtained. Fiberglass spiral chutes are equipment for mining and beneficiation, making them ideal for sand mining and beneficiation on beaches, river beds, beaches, and streams. The equipment has the characteristics of suitable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear separation, strong processing capacity, high efficiency, high concentration, high recovery rate, and reliable operation. It has advantages such as light weight, moisture prevention, rust prevention, corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The mortar with the same working principle is slowly fed to the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the selection width of each product, the equipment gathering hopper will collect and export the obtained multi head ore flow. The transverse plane of the spiral chute and the different slopes of the curves are particularly suitable for the separation of small particles of mineral materials. Can we choose gold with spiral chutes at ? 3. Features and highlights. 1. Large scale, high production capacity, and the objective conditions for contemporary ore processing are to use scale effects to create benefits. 2. Fine granulation refers to the treatment of fine-grained minerals, especially for mineral materials with a particle size of -0.047mm. Originally, the machine could generally ensure the recovery of a particle size of+0.047mm. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP chutes have developed from simple use of gravity and water flow blocking force to composite and applicable centrifugal force, machine vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable minerals or the separation of fine or micro particles can be increased, thereby improving the recovery rate of mineral materials. 4. Based on energy conservation, environmental protection and consumption reduction, the area and space occupied should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting steps, simple structure, convenient for Computerized maintenance management system. The spiral chute can be used to select gold 1. 4. The chute can be divided into three categories according to the Granularity of the processed ore materials: (1) Coarse grained chute. The maximum particle size of the feed is more than 2-3mm, and the maximum can be 100-200mm. (2) The ore chute handles 2-3mm sized ore. (3) Slime chute, feeding Granularity is less than 0.074MM. 5、 Scope of application: FRP spiral chute is suitable for separating fine grained iron ore, ferrotitanium ore, chromite ore, pyrite, cassiterite, tantalum niobium ore, gold ore, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and non-metallic mineral materials with sufficient specific gravity difference. Can gold be selected using a spiral chute? Can gold be selected using a spiral chute