Use of spiral chutes

Introduction to the use of spiral chutes. The chute sorting process includes inclined flow sorting. Mineral mortar is fed to a partially inclined chute or inclined surface. Under the driving force of water flow, the mineral particle group is loose and layered, and the lighter minerals in the upper layer quickly flow out of the groove. The heavier minerals in the lower part either stagnate inside the groove or are discharged from the lower part at a low speed. After obtaining the difference, concentrate and tailings are obtained. The fiberglass spiral chute is a machine for mining and beneficiation, especially ideal for sand mining on coasts, riverbanks, sandbanks, and river beds. The equipment has the characteristics of correct structure, simple installation, small land occupation, simple operation, stable beneficiation, clear screening of minerals, large processing capacity, high efficiency, high beneficiation concentration ratio, high recovery probability, and stable operation. There are also advantages such as lightweight, moisture prevention, rust prevention, corrosion resistance, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Apply skills to make the FRP chute stand up, calibrate the vertical line, fix the iron frame or wood at the appropriate position, and let the sand ore be sent to the two ore inlets on the spiral top by the mortar pump. Add make-up water to mobilize the density of the mineral slurry. The mineral slurry naturally swirls from top to bottom. There is a coherent centrifugal force in the rotating slope flow speed, which is different in density, specific gravity, Granularity and shape of the mineral sand, After the gravity and centrifugal force of the swirling flow, the ore and sand are separated, and the selected ore enters the concentrate hopper and is piped out. The tailings flow into the tailings hopper and are piped to the sand pit, and then discharged by a sand pump, completing the entire beneficiation process. spiral chute uses three highlights and features: high efficiency, high recovery rate, and precise ore separation; 2. No power required; 3. Small weight, anti rust, wear-resistant, and strong corrosion resistance; Low cost and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The frictional force on the surface of 6 diamond sand makes the beneficiation effect superior to other plastic surfaces. The spiral chute uses . 4. The chute can be divided into three types according to the Granularity of the processed ore materials: (1) coarse particle spiral chute. The maximum particle size of the feed is more than 2-3mm, and the maximum can be 100-200mm. (2) Sand ore chute, processing 2-3 mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 Application This product is applicable to sorting iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, wolframite, cassiterite, tantalum ore, niobium ore and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with specific gravity difference. Use of spiral chute: Use of spiral chute