The company that specializes in mineral processing spiral chutes

The beneficiation spiral chute is widely used in the beneficiation of metal and non-ferrous metals due to its low environmental pollution and low cost. Spiral chute is one of the gravity beneficiation machinery, with a structural characteristic of a cubic parabolic cross-section. It is used to handle finer particle sizes of -0.2MM. During the sorting step, do not add water to rinse, and select fine, medium, and tailings in sections at the bottom of the chute. 2、 The working principle is the same: the mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the head end of the rotating groove for sorting. The tail of the rotating groove is equipped with a valve type product selection groove, which divides the selection equipment into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper allows the obtained multi head ore flow to be differentiated, merged and exported. The cross section of the spiral concentrator and the slope change of the curve are particularly suitable for the selection of fine particle materials. mineral processing spiral chute has three strong characteristics and advantages. 1. It is large-scale and has strong processing capacity. Currently, mineral processing objectively requires the creation of benefits through large-scale production. 2. Fine granulation: for the treatment of fine and micro particle grade minerals, especially the treatment of ore materials with a particle size of -0.047 mm, the original machine can generally ensure the recovery of+0.047 mm Granularity. 3. With the development of Hydraulics, two-phase flow, machine vibration, etc., GRP spiral chute has developed from simple use of gravity and water blocking force to composite centrifugal force, equipment vibration force, magnetic separation force, etc. Through a composite force field, the enrichment of useful minerals and the separation of fine and fine particles are increased, thereby increasing the recovery rate of ore materials. 4. With energy saving and environmental protection as the basic starting point, the area and space occupied should be small, and the water and electricity consumption should be small. 5. Convenient and flexible operation, stable sorting steps, simple structure and convenient Computerized maintenance management system. The beneficiation spiral chute consists of six parts: a feeding homogenizer, a feeding groove, a rotating groove, an equipment cutting groove, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by the connection of rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced with coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made wear-resistant layer. It has the advantages of lightweight, solid, and durable consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to divide ore evenly, making it easy to operate. The mineral sorting machine does not need to be placed on a cross (or tripod) on a support table with restricted stacking. The evenly divided slurry is slowly fed onto the surface of the spiral groove through the feeding chute installed on the rotating groove head, and sorting is carried out. The tail of the rotating groove is installed in a valve block type new product acquisition groove, and the new equipment will be sorted radially into three categories (or four types) of new products according to grade. Change the selection width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be separated and led out densely. The cross section of the spiral concentrator and the slope change of the curve are particularly suitable for the separation of fine particle materials. 5、 This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, placer tin ore, tantalum niobium, niobium ore and other nonferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference from small materials with Granularity of 0.3-0.02MM. Which company is strong in mineral processing spiral chutes? @ @ 000 Which company is strong in mineral processing spiral chutes