BL1500 spiral chute

BL1500 Spiral Chute 1. Product Introduction: A gravity separation machine used for separating light and heavy minerals in mineral mortar under inertial centrifugal force during spiral motion. 2、 Working principle: The fiberglass chute separator does not need to be placed on a cross (or tripod) on a support table. The same mineral mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the head end of the spiral groove, and sorting is carried out. The bottom is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that converges and induces the obtained variable mineral flows. The transverse section of the fiberglass spiral chute and the change in slope of the curve are extremely suitable for the selection of fine particle materials. bl1500 spiral chute 3. Features This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, ethylene phosphate, tungsten, tin placer, tantalum, tantalum and niobium from other non-ferrous metal, rare metal and non-ferrous metal ore bodies with different specific gravity. This equipment also has advantages such as stable sorting process, easy operation, wide range of allowable changes in feed density, high enrichment ratio, high recycling rate, small floor area, low water consumption, simple structure, no need for power, large processing output, easy installation, easy operation, low investment, and quick effectiveness. Bl1500 spiral chute IV. According to the particle size of processed ore, the chute can be divided into three types: (1) coarse spiral chute. The maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) The sand ore chute is used to handle 2-3MM particle grade ore materials. (3) Slurry chute, feeding particle size less than 0.074 millimeters. 5、 The application range of fiberglass spiral chute is to handle 0.6-0.03 millimeters or vein ores and minerals, but it is unfavorable for sorting when the mud content is high. At present, it has been widely used for processing iron ore, tungsten, tin ore sand, tantalum niobium, coastal and river placers, and placer gold mines. BL1500 Spiral Chute BL1500 Spiral Chute