Is it better to have more turns in a spiral chute

Is it better to have more coils of spiral chutes? 1. Introduction: Spiral chutes combine the characteristics of spiral concentrators, gravity beneficiation spiral chutes, shakers, and centrifugal concentrators. After being organized by the Ministry of Metallurgy for relevant scientific research, design, operation and appraisal by universities and beneficiation enterprises, they have been recognized as having excellent performance, advanced sorting objectives, and have been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgy Industry. They have now been awarded the Nonferrous Metals Ferrous mines are widely used. This machine is suitable for separating iron ore, ilmenite, ferrochrome, pyrite, zircon, Rutile, monazite, phosphate, tungsten, tin placer, tantalite, niobium ore and other nonferrous metals, rare mineral metals and nonferrous metal minerals with gravity difference from small materials with Granularity of 0.3-0.02 mm. 2、 Technical principle: The fiberglass spiral chute separator can be freely placed on a cross (or tripod) on a support table. Equal slurry is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove, and sorting is carried out. The tail is equipped with a valve type product selection slot, which divides the selected equipment into three (or four) categories according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be densely drawn out. The cross-section of the spiral chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. The more circles of the spiral chute, the better. 3. The special spiral concentrator has attracted more attention in various gravity concentration equipment due to its low power consumption, simple structure, less land occupation, simple operation, stable beneficiation, clear ore screening, no need for moving parts, convenient Computerized maintenance management system, large handling capacity per unit size and other characteristics. Machinery with wider or flatter groove surfaces and larger areas of laminar flow of ore slurry are more suitable for processing medium to fine (-4mm) ore particles. Fiberglass spiral chutes with diameters of 400, 600, 900, and 1200MM have been produced domestically, Ф The processing output of 1200mm four heads is about 4-6 tons/hour. The more circles the spiral chute has, the better. (2) Sand ore chute, handling 2-3MM particle size ore. (3) Slime chute, Granularity of ore feeding is less than 0.074mm. 5、 Use This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, tin ore, tantalum, tantalum niobium ore and other nonferrous metals, rare mineral metals or nonferrous metal mineral bodies with different specific gravity from fine and small materials with Granularity of 0.3-0.02MM. Is it better to have more circles in a spiral chute? Is it better to have more circles in a spiral chute