Spiral chute BL-1500

Spiral chute BL-1500 I. Overview Gravity beneficiation is widely used in the beneficiation of metallic and non-metallic ores due to its low environmental pollution and low cost. The fiberglass spiral chute is a type of gravity separation equipment, with a structural feature of a cubic parabolic cross-section. It is suitable for processing finer particles up to -0.2MM in size. During the selection process, there is no need to add water for flushing, and fine, medium, and tailings are segmented at the end of the chute. 2、 The mineral mortar with equal production principles is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head end of the rotating groove for sorting. The bottom of the rotating groove is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three categories according to grade along the radial direction. Change the selection width of each product by adjusting the position of the valve block, and the equipment gathering bucket will gather and export the obtained variable mineral flow separately. The transverse plane of the fiberglass spiral chute and the change in slope of the curve are particularly applicable for the sorting of fine particle materials. spiral chute bl-1500 III. Features This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate ore, tungsten ore sand, tin, tantalum niobium ore, tantalum niobium ore or other non-ferrous metal ores, rare mineral metals and non-metallic minerals with gravity difference. This machine also has advantages such as stable selection process, easy operation, wide range of allowable changes in feed density, high enrichment, high recovery rate, small footprint, low water consumption, simple structure, no need for power, large processing capacity, easy installation, easy operation, low investment, and quick effectiveness. Spiral chute bl-1500 4. Structural composition: The fiberglass chute is composed of six parts: a feeding homogenizer, a feeding groove, a rotating groove, an equipment cutting groove, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by the connection of rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced with coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made wear-resistant layer. It has the advantages of lightweight, solid, and durable consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to divide ore evenly, making it easy to operate. The mineral sorting machine does not need to be placed on a cross (or tripod) on a support table with restricted stacking. The evenly divided slurry is slowly fed onto the surface of the spiral groove through the feeding chute installed on the rotating groove head, and sorting is carried out. The tail of the rotating groove is installed in a valve block type new product acquisition groove, and the new equipment will be sorted radially into three categories (or four types) of new products according to grade. Change the selection width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be separated and led out densely. The cross section of the spiral concentrator and the slope change of the curve are particularly suitable for the separation of fine particle materials. 5、 In the application field, the glass fiber reinforced plastic chute is suitable for separating fine iron ore, ferrotitanium ore, chromite ore, pyrite ore, placer tin ore, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon ore and rare earth ore, and has enough density ratio difference to obtain other metals and non gold minerals. Spiral chute bl-1500 Spiral chute bl-1500