PPR spiral chute

PPR spiral chute 1. Explanation: The spiral concentrator summarizes the characteristics of spiral concentrators, spiral concentrators, shakers, and centrifugal gold concentrators. After evaluation by relevant scientific research, design, universities, and beneficiation enterprises organized by the Ministry of Metallurgy, it is believed that this type of mechanical performance is excellent, the sorting indicators are advanced, and it has won the Science and Technology Research Achievement Award of the Ministry of Metallurgy Industry. It has been widely used in non-ferrous and black mining metals. This machine is suitable for separating small materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, cassiterite, tantalum niobium, niobium and other non-ferrous metal ore, rare mineral gold or non-metallic mineral body with gravity difference. 2、 Working principle: The fiberglass spiral chute concentrator does not need to be restricted from being placed on the cross (or tripod) of the support table. The same mineral mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove for sorting. A valve type equipment is installed at the tail to obtain a slot, allowing the selected products to be divided into three categories (or four categories) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that differentially merges and leads out the intercepted multi-directional mineral flow. The transverse plane and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine-grained materials. PPR spiral chute 3. Features This equipment can be used to separate iron, ferrotitanium, ferrochrome, ferrosulfide, zircon ore, Rutile ore, monazite ore, phosphate rock, tungsten, tin ore, tantalite ore, niobium and other non-ferrous metal ores, rare mineral metals and non-metallic minerals due to gravity differences. This machine has the advantages of stable and easy control in the selection process, allowing for a wide range of ore concentration, high enrichment ratio, high recycling rate, small land occupation, low water consumption, simple structure, no need for power, large processing output, simplified installation, simple operation, low investment, and fast efficiency. PPR spiral chute IV. According to the particle size of the processed mineral materials, the chute can be divided into three types: (1) coarse spiral chute. The maximum Granularity of the feed is more than 2-3mm, and the maximum can be 100-200mm. (2) Mineral sand chute, processing 2-3MM particle grade mineral aggregate. (3) The spiral chute of the ore slurry has a feeding particle size of less than 0.074 millimeters. 5、 Scope of Application Spiral chute is applicable to the separation of fine grained iron ore, ferrotitanium ore, chromite ore, pyrite, sand tin, tantalum niobium ore, placer gold ore, coal, monazite, Rutile, zircon ore, rare earth ore and other metal and non-metallic mineral materials with sufficient specific gravity difference. PPR spiral chute PPR spiral chute