Spiral Chute Official Website

The official website of the spiral chute explains that the chute selection includes the process of inclined surface flow selection. The slurry is fed to a inclined chute or slope, and under the assistance of water, the mineral particle group is loose and layered. The light minerals in the upper layer are quickly discharged from the groove, while the heavy mineral materials in the lower layer stay in the groove or are discharged from the bottom at low speed. After each is connected, fine beneficiation or tailings can be obtained. Spiral chutes are equipment for mining and beneficiation, especially ideal for sand mining along coasts, rivers, sandbanks, and streams. The product has the characteristics of appropriate structure, easy installation, small footprint, easy operation, stable beneficiation, clear mineral separation, high yield, high efficiency beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of small weight, moisture-proof, rust proof, not easy to corrode, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 The method of use is to set up the fiberglass chute, calibrate the vertical line, use an iron frame or wood to fix it in the appropriate position, and use a slurry pump to send the sand ore to the two feeding ports on the spiral head to supplement water and adjust the density of the mineral sand slurry. The mineral sand slurry naturally rotates from top to bottom, and an inertial centrifugal force occurs in the flow speed of the rotating inclined plane, which varies in density, specific gravity, particle size, and morphology of the sand ore, Under the action of swirling gravity or centrifugal force, the sand and ore are separated. The selected ore flows into the concentrate hopper and is piped out, while the tailings flow into the tailings hopper and are piped to the sand pit. Then, they are discharged by a sand pump, completing the entire beneficiation process. Spiral Chute Official Website 3. Highlights and Features: 1. Ultra high efficiency, high recovery rate, and precise ore separation; 2. No power required; 3. Lightweight, rust resistant, wear-resistant, and corrosion-resistant; 4. Low operating cost and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force formed by the surface of 6 diamond sand makes the beneficiation effect superior to other plastic surfaces. The official website of spiral chute 4. According to the Granularity of processed mineral materials, the chutes can be divided into three types: (1) coarse spiral chute, the maximum particle size of feeding is more than 2-3mm, and the maximum can be 100-200mm. (2) Sand ore chute, processing 2-3 millimeter sized ore. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 This machine is suitable for separating iron ore, Ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum ore, niobium ore and other non-ferrous metals, rare mineral metals or non-ferrous metal minerals with different density and specific gravity from small Granularity of 0.3-0.02MM. Spiral Chute Official Website Spiral Chute Official Website