Complete List of Spiral Chute Equipment

Complete set of spiral chute equipment: 1. Explanation: The chute sorting includes a slope flow sorting process. Mineral mortar is fed to some inclined grooves or slopes, and under the push of water, the mineral particle group becomes loose and layered. The upper layer of light mineral quickly flows out of the groove, while the lower layer of heavy mineral material stays in the groove or is discharged from the bottom at low speed. After being collected, the selected ore and tailings are obtained. Spiral chutes are mining and beneficiation machines, especially ideal for sand mining on coasts, rivers, beaches, and streams. The equipment has the characteristics of suitable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear ore separation, large processing volume, high efficiency, high concentration of beneficiation, high recovery rate, and reliable operation. There are also advantages such as small weight, moisture prevention, rust prevention, less corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The technical principle is that the mineral mortar is slowly fed onto the rotating groove surface through a feeding groove installed at the head of the spiral groove for sorting. The tail of the spiral groove is equipped with a valve type product selection groove, which divides the selection equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the multi-directional mineral flow to be differentiated and converged. The transverse surface of the fiberglass chute and the slope change of the curve are particularly suitable for the selection of fine particle materials. The third highlight or characteristic of the spiral chute equipment is its high efficiency, high recovery rate, and accurate beneficiation; 2. No power required; 3. Lightweight, rust resistant, durable, wear-resistant, and corrosion-resistant; 4. Low cost operation, long service life; 5. Strong adaptability to fluctuation of feed volume, density, Granularity and grade; The friction force on the surface of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. Spiral chutes are composed of feeding homogenizers, crosses (tripods), feeding chutes, spiral chutes, intercepting chutes, gathering buckets, and trough pillars. 5、 The application range of fiberglass spiral chute is to handle 0.6-0.03 millimeters or vein ores and minerals, but it is unfavorable for sorting when the mud content is high. At present, it has been widely used for processing iron ore, tungsten, tin ore sand, tantalum niobium, coastal and river placers, and placer gold mines. Complete List of Spiral Chute Equipment Complete List of Spiral Chute Equipment