What is the fineness of titanium selection in spiral chutes

What is the fineness of titanium in spiral chute beneficiation? 1. Overview: Gravity beneficiation is widely used in the beneficiation of metallic and non-metallic ores due to its small environmental pollution and low cost. Fiberglass reinforced plastic chute is a type of gravity sorting machine, with a structural characteristic that the cross-section presents a cubic parabolic state, suitable for handling finer particle levels of -0.2MM. In the sorting step, there is no need to add water for flushing, and the fine, medium, and tailings are segmented at the tail end of the chute. 2、 The application technique is to make the fiberglass spiral chute stand up, align it with the vertical line, use an iron frame or wood to stabilize it in the appropriate position, use a mortar pump to deliver the sand ore to the two feeding ports on the spiral head, enter the supplementary water, adjust the concentration of the ore slurry, and the ore slurry will naturally swirl from top to bottom. In the rotating inclined plane flow rate, an inertial centrifugal force will appear, resulting in differences in gravity, particle size, and morphology of the ore sand, By obtaining gravity and centrifugal force through swirling flow, the efficiency is achieved, allowing the separation of ore and sand. The selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings flow into the tailings hopper and are moved to the sand tank through pipelines, and then discharged by a sand pump, completing the entire beneficiation process. What is the fineness of titanium selection in the spiral chute? 3. Features: 1. Stable sorting process, easy operation. 2. Allowing for a wide range of feed densities. 3. High enrichment ratio, high recycling rate. 4. Small land occupation and low water consumption. 5. Simple structure, no need for power. 6. Large processing yield. 7. Easy installation and easy operation. 8. Low investment, quick results. How much fineness of titanium selection in the spiral chute According to the Granularity of the processed ore materials, the chutes can be divided into three categories: (1) coarse spiral chutes. The maximum particle size of the feed is more than 2-3mm, and the maximum can reach 100-200mm. (2) Mineral sand chute, processing 2-3 millimeter sized ore. (3) Slime spiral chute, feeding Granularity<0.074mm. 5、 This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon ore, Rutile, monazite, phosgenite, wolframite, cassiterite, tantalum, niobium and other nonferrous metals, rare mineral metals and non nonferrous metal mineral bodies with specific gravity difference from fine materials with Granularity of 0.3-0.02MM. What is the fineness of titanium selected by spiral chute? What is the fineness of titanium selected by spiral chute