Plastic steel spiral chute

Plastic steel spiral chute I. Brief introduction The gravity separation spiral chute is a combination of the characteristics of spiral chute, spiral chute, shaking table, and centrifuges for mineral processing. After relevant scientific research organized by the Ministry of Metallurgical Industry, and appraisal carried out by the design, universities, mines and other departments, it is recognized that this kind of mechanical performance is excellent, and the separation goal is improved. At the same time, it has won the scientific and technological research achievement award of the Ministry of Metallurgical Industry. It has been used in non-ferrous and Ferrous mines in a large number. This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon, Rutile, monazite, phosphate ore, wolframite, placer tin, tantalum niobium ore, tantalum niobium ore or other non-ferrous metal ores, rare mineral metals or non-metallic minerals with gravity difference from 0.3-0.02 mm fine materials. 2、 By using a method, the spiral chute is erected and aligned with the vertical line. An iron frame or wood is used to position it in a suitable position. The sand and ore are pumped by a slurry pump to the two feeding ports above the spiral, where water is added and the density of the mineral slurry is adjusted. The slurry naturally swirls from high to low, generating an inertial centrifugal force in the swirling slope flow velocity. The difference is based on the specific gravity, particle size, and state of the mineral sand, By utilizing the gravity and centrifugal force of the swirling flow, the sand and ore are separated. The selected ore enters the concentrate hopper and is piped out. The tailings are discharged into the tailings hopper and moved to the sand tank through a pipeline, and then discharged by a mortar pump, completing the entire beneficiation process. plastic steel spiral chute 3. Special features 1. The sorting process is stable and easy to control 2. The feed density is allowed to vary widely 3. The ultra-high enrichment ratio and high recovery rate 4. The area occupied is small and the water consumption is small 5. The structure is simple and no power is needed 6. The processing capacity is large 7. The installation is simple and the operation is simple 8. The investment is small and the results are quick. The plastic steel spiral chute 4. The type is based on the ore size handled, Chutes can be divided into three categories: (1) Coarse grained chutes, with a maximum ore particle size of 2-3 millimeters or more, and a maximum of 100-200mm. (2) Sand chute, processing 2-3MM Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074mm. 5、 The application range of fiberglass chute is 0.6-0.03mm for processing vein ore and ore sand, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used in the treatment of iron, tungsten, sand tin, tantalum niobium, coastal and riverbed mineral sand and sand gold. Plastic Steel Spiral Chute Plastic Steel Spiral Chute