Spiral chute feed equalizer

Spiral chute feeding and ore homogenizer 1. Describing that the chute sorting of minerals belongs to the inclined flow sorting step. Mineral mortar is provided on partially inclined inclined chutes or slopes. With the assistance of flowing water, the mineral particle group is not tight and layered. The upper part of the light mineral quickly flows out of the groove, while the lower layer of minerals with a larger proportion stay inside the groove or discharge from the bottom at a low speed. After being connected, concentrate and tailings can be obtained. Spiral chutes are machinery for mining and beneficiation, especially ideal for mineral mining in coastal areas, riverbanks, sandbanks, and streams. The product also has the characteristics of reasonable structure, simple installation, small footprint, simple operation, stable beneficiation, clear screening of ore, high yield, high efficiency, high beneficiation enrichment ratio, high recycling rate, and reliable operation. It has the advantages of small weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong applicability to the fluctuation of feed volume and density, Granularity, and grade. 2、 Working principle: The fiberglass spiral chute concentrator does not need to be restricted from being placed on the cross (or tripod) of the support table. The same mineral mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove for sorting. A valve type equipment is installed at the tail to obtain a slot, allowing the selected products to be divided into three categories (or four categories) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that differentially merges and leads out the intercepted multi-directional mineral flow. The transverse plane and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine-grained materials. Spiral Chute Feeding Equalizer III. Highlights: 1. Stable, easy to control, with a large concentration range. 2. Strong production and processing capacity of mineral materials, high enrichment ratio, and high recovery probability. 3. The area is not occupied much, with low water consumption, simple structure, and no need for power. 4. Installation is simple and easy to operate, with low investment and fast returns. Spiral chute feeding equalizer 4. Structural composition: fiberglass spiral chute is composed of feeding homogenizer, cross (tripod), feeding chute, spiral groove, acquisition groove, gathering bucket, and groove support. 5、 The fiberglass spiral chute is suitable for processing 0.6-0.03mm and vein and placer ores, but it is unfavorable for sorting when the mud content is high. It is now widely used for processing iron ore, tungsten, tin, niobium tantalum ore, coastal and river sand, and placer gold, among others. Spiral chute feeding equalizer Spiral chute feeding equalizer