Deformation of the spiral chute surface of mineral processing equipment

The deformation of the spiral chute surface of the beneficiation equipment is introduced. A gravity beneficiation machine is used for separating light and heavy minerals through the continuous centrifugal force that occurs during the rotary spiral movement of mortar. 2、 By using a method, the spiral chute is erected and aligned with the vertical line. An iron frame or wood is used to position it in a suitable position. The sand and ore are pumped by a slurry pump to the two feeding ports above the spiral, where water is added and the density of the mineral slurry is adjusted. The slurry naturally swirls from high to low, generating an inertial centrifugal force in the swirling slope flow velocity. The difference is based on the specific gravity, particle size, and state of the mineral sand, By utilizing the gravity and centrifugal force of the swirling flow, the sand and ore are separated. The selected ore enters the concentrate hopper and is piped out. The tailings are discharged into the tailings hopper and moved to the sand tank through a pipeline, and then discharged by a mortar pump, completing the entire beneficiation process. Deformation of the spiral chute surface of the beneficiation equipment. Highlight or characteristic 1. Ultra high efficiency, high recovery rate, and accurate mineral sorting; 2. No power required; 3. Lightweight, rust resistant, wear-resistant, and corrosion-resistant; 4. Low cost, long service life; 5. It is applicable to the fluctuation of feed volume, density, Granularity and grade; The friction force formed by the appearance of 6 diamond sand makes the beneficiation efficiency superior to other plastic surfaces. The surface deformation of spiral chute of mineral processing equipment is . 4. The chute can be divided into three types according to the Granularity of the processed ore materials: (1) coarse particle spiral chute, the maximum particle size of the feed is more than 2-3mm, and the maximum can be 100-200mm. (2) Sand ore chute, processing 2-3 mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 The application scope of FRP chutes is to separate fine iron ore, Ilmenite, Chromite, pyrite, tin, tantalum niobium, gold, coal, monazite, Rutile, zircon sand, rare earth and other metal and non nonferrous metal minerals with completely sufficient density and gravity difference. Deformation of the spiral chute surface of beneficiation equipment Deformation of the spiral chute surface of beneficiation equipment